Yellow is the colour of the sun, the oldest and most central symbol of divine power to ancient cultures. The sun has been worshipped by countless religions with numerous sun-gods wearing yellow as representations of it. The Greek sun-god Helios wore a yellow robe when riding his chariot across the heavens. Yellow Ochre is one of the earliest pigments and has been found in cave paintings of the ancient world dating from 15000BC.
Yellow is the colour of the sun, the oldest and most central symbol of divine power to ancient cultures. The sun has been worshipped by countless religions with numerous sun-gods wearing yellow as representations of it. The Greek sun-god Helios wore a yellow robe when riding his chariot across the heavens. Yellow Ochre is one of the earliest pigments and has been found in cave paintings of the ancient world dating from 15000BC.
Environmentally friendly product made with natural sustainable ingredients. It contains no VOCs, no petrochemical-based ingredients, and no lead. Water-based. All Rose of Jericho paints comply with the latest environmental legislation.
To be used for the decoration of ceilings and walls in low traffic or low usage areas, and particularly appropriate for the decoration of fine decorative plasterwork. For interior use only. Porous surfaces should be primed with Claircolle (RJ 4.05). Soft Distemper applied to appropriate surfaces will not readily rub off on clothes. It is not as wipeable as Casein Distemper (RJ 4.02), Oil Bound Distemper distemper (RJ 4.03) or Vinyl Matt Emulsion. Distempers should not be over painted with emulsion or other modern paint types.
c.10 m²/ litre/coat on smooth surfaces of average porosity.
Limited. Unopened cans have a 12 week shelf life when stored in a cool environment. Protect from frost. Best used within 4 weeks of purchase.
Matt with subtle variations of colour and tone.
Touch dry in 4 hours in good drying conditions, Allow 12 hours between coats.
Ensure Soft Distemper is within shelf life period. All surfaces should be sound, dry, and free from dirt, oil, grease or other contamination. Previously distempered surfaces should be wiped or washed free of all powdery surface material. Porous surfaces should be primed with one coat of Claircolle. New lime plaster should be allowed to carbonate and dry for at least four weeks prior to application. Any fungus or mould must be treated with a fungicide and making good and filling should be carried out with material appropriate to the substrate. Soft Distemper can be applied to prepare previously emulsion painted surfaces in normal domestic environments. It is not recommended that distemper be applied to emulsion and other modern paint types in poorly heated and poorly ventilated buildings including churches. Seek Technical Advice. Sample trials should be carried out well in advance to ensure that the surface is suitable for application.
Two coats normally recommended. Apply by brush. Cannot be spray or roller applied. Soft Distemper is a thick gel that brushes out readily, and thinning should not be necessary for primed or previously painted surfaces. Soft Distemper is temperature sensitive and will thicken in cold conditions. It can be returned to the correct consistency by placing in a warm room or standing the can in a bucket of hot water. Stirring with a mechanical whisk can be advantageous for application to certain surfaces, as can light mist spraying of the surface prior to application. Only if absolutely necessary dilute by no more than 10% water and whisk thoroughly. Brushes and equipment should be cleaned with warm, soapy water immediately after use.
2.5 and 5 litre tins. Made to order.
Environmentally friendly product made with natural sustainable ingredients. It contains no VOCs, no petrochemical based ingredients, and no lead. Water-based. All Rose of Jericho paints comply with the latest environmental legislation.
To be used for the decoration of walls and ceilings. For interior use only. Casein Distemper applied to appropriate surfaces will not readily rub off on clothes. It is more wipeable than Soft Distemper but not as wipeable as modern vinyl emulsion paints. Distempers should not be over painted with emulsion or other modern paint types.
10-12 m²/ litre/coat on smooth surface of average porosity.
Limited. Unopened cans have a 12 week shelf life when stored in a cool environment. Best used within 4 weeks of purchase. Protect from frost.
Matt with subtle variations of colour and tone.
Touch dry in 4 hours in good drying conditions. Allow 12 hours between coats.
Ensure Casein Distemper is within shelf life period. All surfaces should be sound, dry, and free from dirt, oil, grease or other contamination. Previously distempered surfaces should be wiped or washed free of any powdery surface material. Porous surfaces should be primed with a wash coat of Casein Distemper diluted with 10% clean water. New lime plaster should be allowed to carbonate and dry for at least four weeks prior to application. Any fungus or mould must be treated with a fungicide and making good and filling should be carried out with a material appropriate to the substrate. Casein Distemper can be applied to previously prepared emulsion painted surfaces in dry, heated, ventilated domestic environments. It is not recommended that distemper be applied to emulsion and other modern paint types in poorly heated and poorly ventilated buildings including churches. Seek Technical Advice. Sample trials should be carried out well in advance to ensure that the surface is suitable for application.
Two coats normally recommended. Apply by brush. Cannot be spray applied. Brushes and equipment should be cleaned with warm, soapy water immediately after use. Thinning is not normally necessary for primed or previously painted surfaces. Casein Distemper is temperature sensitive and will thicken in cold conditions. If paint has thickened, it can be returned to the correct consistency by placing in a warm room or standing the can in a bucket of hot water. Only if absolutely necessary dilute by no more than 10% (by volume) with clean water. Coverage 10-12 m²/litre/coat on smooth surface of average porosity.
2.5 and 5 litre cans. Made to order.
Environmentally friendly product made with natural sustainable ingredients. It contains no VOCs, no petrochemical-based ingredients, and no lead. Water-based. All Rose of Jericho paints comply with the latest environmental legislation.
To be used for the decoration of ceilings and walls in low traffic or low usage areas, and particularly appropriate for the decoration of fine decorative plasterwork. For interior use only. Porous surfaces should be primed with Claircolle (RJ 4.05). Soft Distemper applied to appropriate surfaces will not readily rub off on clothes. It is not as wipeable as Casein Distemper (RJ 4.02), Oil Bound Distemper distemper (RJ 4.03) or Vinyl Matt Emulsion. Distempers should not be over painted with emulsion or other modern paint types.
c.10 m²/ litre/coat on smooth surfaces of average porosity.
Limited. Unopened cans have a 12 week shelf life when stored in a cool environment. Protect from frost. Best used within 4 weeks of purchase.
Matt with subtle variations of colour and tone.
Touch dry in 4 hours in good drying conditions, Allow 12 hours between coats.
Ensure Soft Distemper is within shelf life period. All surfaces should be sound, dry, and free from dirt, oil, grease or other contamination. Previously distempered surfaces should be wiped or washed free of all powdery surface material. Porous surfaces should be primed with one coat of Claircolle. New lime plaster should be allowed to carbonate and dry for at least four weeks prior to application. Any fungus or mould must be treated with a fungicide and making good and filling should be carried out with material appropriate to the substrate. Soft Distemper can be applied to prepare previously emulsion painted surfaces in normal domestic environments. It is not recommended that distemper be applied to emulsion and other modern paint types in poorly heated and poorly ventilated buildings including churches. Seek Technical Advice. Sample trials should be carried out well in advance to ensure that the surface is suitable for application.
Two coats normally recommended. Apply by brush. Cannot be spray or roller applied. Soft Distemper is a thick gel that brushes out readily, and thinning should not be necessary for primed or previously painted surfaces. Soft Distemper is temperature sensitive and will thicken in cold conditions. It can be returned to the correct consistency by placing in a warm room or standing the can in a bucket of hot water. Stirring with a mechanical whisk can be advantageous for application to certain surfaces, as can light mist spraying of the surface prior to application. Only if absolutely necessary dilute by no more than 10% water and whisk thoroughly. Brushes and equipment should be cleaned with warm, soapy water immediately after use.
2.5 and 5 litre tins. Made to order.
Environmentally friendly product made with natural sustainable ingredients. It contains no VOCs, no petrochemical-based ingredients, and no lead. Water-based. All Rose of Jericho paints comply with the latest environmental legislation.
To be used for the decoration of ceilings and walls in low traffic or low usage areas, and particularly appropriate for the decoration of fine decorative plasterwork. For interior use only. Porous surfaces should be primed with Claircolle (RJ 4.05). Soft Distemper applied to appropriate surfaces will not readily rub off on clothes. It is not as wipeable as Casein Distemper (RJ 4.02), Oil Bound Distemper distemper (RJ 4.03) or Vinyl Matt Emulsion. Distempers should not be over painted with emulsion or other modern paint types.
c.10 m²/ litre/coat on smooth surfaces of average porosity.
Limited. Unopened cans have a 12 week shelf life when stored in a cool environment. Protect from frost. Best used within 4 weeks of purchase.
Matt with subtle variations of colour and tone.
Touch dry in 4 hours in good drying conditions, Allow 12 hours between coats.
Ensure Soft Distemper is within shelf life period. All surfaces should be sound, dry, and free from dirt, oil, grease or other contamination. Previously distempered surfaces should be wiped or washed free of all powdery surface material. Porous surfaces should be primed with one coat of Claircolle. New lime plaster should be allowed to carbonate and dry for at least four weeks prior to application. Any fungus or mould must be treated with a fungicide and making good and filling should be carried out with material appropriate to the substrate. Soft Distemper can be applied to prepare previously emulsion painted surfaces in normal domestic environments. It is not recommended that distemper be applied to emulsion and other modern paint types in poorly heated and poorly ventilated buildings including churches. Seek Technical Advice. Sample trials should be carried out well in advance to ensure that the surface is suitable for application.
Two coats normally recommended. Apply by brush. Cannot be spray or roller applied. Soft Distemper is a thick gel that brushes out readily, and thinning should not be necessary for primed or previously painted surfaces. Soft Distemper is temperature sensitive and will thicken in cold conditions. It can be returned to the correct consistency by placing in a warm room or standing the can in a bucket of hot water. Stirring with a mechanical whisk can be advantageous for application to certain surfaces, as can light mist spraying of the surface prior to application. Only if absolutely necessary dilute by no more than 10% water and whisk thoroughly. Brushes and equipment should be cleaned with warm, soapy water immediately after use.
2.5 and 5 litre tins. Made to order.
Environmentally friendly product made with natural sustainable ingredients. It contains no VOCs, no petrochemical based ingredients, and no lead. Water-based. All Rose of Jericho paints comply with the latest environmental legislation.
To be used for the decoration of walls and ceilings. For interior use only. Casein Distemper applied to appropriate surfaces will not readily rub off on clothes. It is more wipeable than Soft Distemper but not as wipeable as modern vinyl emulsion paints. Distempers should not be over painted with emulsion or other modern paint types.
10-12 m²/ litre/coat on smooth surface of average porosity.
Limited. Unopened cans have a 12 week shelf life when stored in a cool environment. Best used within 4 weeks of purchase. Protect from frost.
Matt with subtle variations of colour and tone.
Touch dry in 4 hours in good drying conditions. Allow 12 hours between coats.
Ensure Casein Distemper is within shelf life period. All surfaces should be sound, dry, and free from dirt, oil, grease or other contamination. Previously distempered surfaces should be wiped or washed free of any powdery surface material. Porous surfaces should be primed with a wash coat of Casein Distemper diluted with 10% clean water. New lime plaster should be allowed to carbonate and dry for at least four weeks prior to application. Any fungus or mould must be treated with a fungicide and making good and filling should be carried out with a material appropriate to the substrate. Casein Distemper can be applied to previously prepared emulsion painted surfaces in dry, heated, ventilated domestic environments. It is not recommended that distemper be applied to emulsion and other modern paint types in poorly heated and poorly ventilated buildings including churches. Seek Technical Advice. Sample trials should be carried out well in advance to ensure that the surface is suitable for application.
Two coats normally recommended. Apply by brush. Cannot be spray applied. Brushes and equipment should be cleaned with warm, soapy water immediately after use. Thinning is not normally necessary for primed or previously painted surfaces. Casein Distemper is temperature sensitive and will thicken in cold conditions. If paint has thickened, it can be returned to the correct consistency by placing in a warm room or standing the can in a bucket of hot water. Only if absolutely necessary dilute by no more than 10% (by volume) with clean water.
2.5 and 5 litre cans. Made to order.
Environmentally friendly product made with natural sustainable ingredients. It contains no VOCs, no petrochemical based ingredients, and no lead. Water-based. All Rose of Jericho paints comply with the latest environmental legislation.
To be used for the decoration of walls and ceilings. For interior use only. Casein Distemper applied to appropriate surfaces will not readily rub off on clothes. It is more wipeable than Soft Distemper but not as wipeable as modern vinyl emulsion paints. Distempers should not be over painted with emulsion or other modern paint types.
10-12 m²/ litre/coat on smooth surface of average porosity
Limited. Unopened cans have a 12 week shelf life when stored in a cool environment. Best used within 4 weeks of purchase. Protect from frost.
Matt with subtle variations of colour and tone.
Touch dry in 4 hours in good drying conditions. Allow 12 hours between coats.
Ensure Casein Distemper is within shelf life period. All surfaces should be sound, dry, and free from dirt, oil, grease or other contamination. Previously distempered surfaces should be wiped or washed free of any powdery surface material. Porous surfaces should be primed with a wash coat of Casein Distemper diluted with 10% clean water. New lime plaster should be allowed to carbonate and dry for at least four weeks prior to application. Any fungus or mould must be treated with a fungicide and making good and filling should be carried out with a material appropriate to the substrate. Casein Distemper can be applied to previously prepared emulsion painted surfaces in dry, heated, ventilated domestic environments. It is not recommended that distemper be applied to emulsion and other modern paint types in poorly heated and poorly ventilated buildings including churches. Seek Technical Advice. Sample trials should be carried out well in advance to ensure that the surface is suitable for application.
Two coats normally recommended. Apply by brush. Cannot be spray applied. Brushes and equipment should be cleaned with warm, soapy water immediately after use. Thinning is not normally necessary for primed or previously painted surfaces. Casein Distemper is temperature sensitive and will thicken in cold conditions. If paint has thickened, it can be returned to the correct consistency by placing in a warm room or standing the can in a bucket of hot water. Only if absolutely necessary dilute by no more than 10% (by volume) with clean water.
2.5 and 5 litre cans. Made to order.
Environmentally friendly product made with natural sustainable ingredients. It contains no VOCs, no petrochemical based ingredients, and no lead. Water-based. All Rose of Jericho paints comply with the latest environmental legislation.
To be used for the decoration of walls and ceilings. For interior use only. Casein Distemper applied to appropriate surfaces will not readily rub off on clothes. It is more wipeable than Soft Distemper but not as wipeable as modern vinyl emulsion paints. Distempers should not be over painted with emulsion or other modern paint types.
10-12 m²/ litre/coat on smooth surface of average porosity.
Limited. Unopened cans have a 12 week shelf life when stored in a cool environment. Best used within 4 weeks of purchase. Protect from frost.
Matt with subtle variations of colour and tone.
Touch dry in 4 hours in good drying conditions. Allow 12 hours between coats.
Ensure Casein Distemper is within shelf life period. All surfaces should be sound, dry, and free from dirt, oil, grease or other contamination. Previously distempered surfaces should be wiped or washed free of any powdery surface material. Porous surfaces should be primed with a wash coat of Casein Distemper diluted with 10% clean water. New lime plaster should be allowed to carbonate and dry for at least four weeks prior to application. Any fungus or mould must be treated with a fungicide and making good and filling should be carried out with a material appropriate to the substrate. Casein Distemper can be applied to previously prepared emulsion painted surfaces in dry, heated, ventilated domestic environments. It is not recommended that distemper be applied to emulsion and other modern paint types in poorly heated and poorly ventilated buildings including churches. Seek Technical Advice. Sample trials should be carried out well in advance to ensure that the surface is suitable for application.
Two coats normally recommended. Apply by brush. Cannot be spray applied. Brushes and equipment should be cleaned with warm, soapy water immediately after use. Thinning is not normally necessary for primed or previously painted surfaces. Casein Distemper is temperature sensitive and will thicken in cold conditions. If paint has thickened, it can be returned to the correct consistency by placing in a warm room or standing the can in a bucket of hot water. Only if absolutely necessary dilute by no more than 10% (by volume) with clean water.
2.5 and 5 litre cans. Made to order.
Environmentally friendly product made with natural sustainable ingredients. It contains no VOCs, no petrochemical based ingredients, and no lead. Water-based. All Rose of Jericho paints comply with the latest environmental legislation
To be used for the decoration of walls. For interior use only. Unpainted porous surfaces should be primed with Claircolle (RJ 4.05). Oil Bound Distemper applied to appropriate surfaces will not readily rub off on clothes. It is not as wipeable as modern vinyl emulsion paints. Distempers should not be over-painted with emulsion or other modern paint types.
10m²/ litre/coat on smooth surface of average porosity.
Limited. Unopened cans have c.12 week shelf life when stored in a cool environment. Protect from frost. Best used within 4 weeks of purchase.
Matt with subtle variations of colour and tone.
Touch dry in 4 hours in good drying conditions. Allow 12 hours between coats.
Ensure Oil Bound Distemper is within shelf life period. All surfaces should be sound, dry, and free from dirt, oil, grease or other contamination. Previously distempered surfaces should be wiped or washed free of any powdery surface material. Unpainted porous surfaces should be primed with one coat of Claircolle. Any fungus or mould must be treated with a fungicide and making good and filling should be carried out with a material appropriate to the substrate. Oil Bound Distemper can normally be applied to prepared previously emulsion painted surfaces in normal domestic environments. It is not recommended that distemper be applied to emulsion and other modern paint types in poorly heated and poorly ventilated churches. Seek Technical Advice. Sample trials should be carried out well in advance to ensure that the surface is suitable for application.
Two coats normally recommended. Apply by brush. Cannot be spray applied. Brushes and equipment should be cleaned with warm, soapy water immediately after use. Thinning is not normally necessary for primed or previously painted surfaces. Oil Bound Distemper is temperature sensitive and will thicken in cold conditions. If paint has thickened, it can be returned to the correct consistency by placing in a warm room or standing the can in a bucket of hot water. Only if absolutely necessary dilute by no more than 10% (by volume) with clean water.
2.5 and 5 litre cans. Made to order.
Environmentally friendly product made with natural sustainable ingredients. It contains no VOCs, no petrochemical based ingredients, and no lead. Water-based. All Rose of Jericho paints comply with the latest environmental legislation.
To be used for the decoration of walls. For interior use only. Unpainted porous surfaces should be primed with Claircolle (RJ 4.05). Oil Bound Distemper applied to appropriate surfaces will not readily rub off on clothes. It is not as wipeable as modern vinyl emulsion paints. Distempers should not be over-painted with emulsion or other modern paint types
10m²/ litre/coat on smooth surface of average porosity.
Limited. Unopened cans have c.12 week shelf life when stored in a cool environment. Protect from frost. Best used within 4 weeks of purchase.
Matt with subtle variations of colour and tone.
Touch dry in 4 hours in good drying conditions. Allow 12 hours between coats.
Ensure Oil Bound Distemper is within shelf life period. All surfaces should be sound, dry, and free from dirt, oil, grease or other contamination. Previously distempered surfaces should be wiped or washed free of any powdery surface material. Unpainted porous surfaces should be primed with one coat of Claircolle. Any fungus or mould must be treated with a fungicide and making good and filling should be carried out with a material appropriate to the substrate. Oil Bound Distemper can normally be applied to prepared previously emulsion painted surfaces in normal domestic environments. It is not recommended that distemper be applied to emulsion and other modern paint types in poorly heated and poorly ventilated churches. Seek Technical Advice. Sample trials should be carried out well in advance to ensure that the surface is suitable for application.
Two coats normally recommended. Apply by brush. Cannot be spray applied. Brushes and equipment should be cleaned with warm, soapy water immediately after use. Thinning is not normally necessary for primed or previously painted surfaces. Oil Bound Distemper is temperature sensitive and will thicken in cold conditions. If paint has thickened, it can be returned to the correct consistency by placing in a warm room or standing the can in a bucket of hot water. Only if absolutely necessary dilute by no more than 10% (by volume) with clean water.
2.5 and 5 litre cans. Made to order.
Environmentally friendly product made with natural sustainable ingredients. It contains no VOCs, no petrochemical based ingredients, and no lead. Water-based. All Rose of Jericho paints comply with the latest environmental legislation.
To be used for the decoration of walls. For interior use only. Unpainted porous surfaces should be primed with Claircolle (RJ 4.05). Oil Bound Distemper applied to appropriate surfaces will not readily rub off on clothes. It is not as wipeable as modern vinyl emulsion paints. Distempers should not be over-painted with emulsion or other modern paint types.
10m²/ litre/coat on smooth surface of average porosity.
Limited. Unopened cans have c.12 week shelf life when stored in a cool environment. Protect from frost. Best used within 4 weeks of purchase.
Matt with subtle variations of colour and tone.
Touch dry in 4 hours in good drying conditions. Allow 12 hours between coats.
Ensure Oil Bound Distemper is within shelf life period. All surfaces should be sound, dry, and free from dirt, oil, grease or other contamination. Previously distempered surfaces should be wiped or washed free of any powdery surface material. Unpainted porous surfaces should be primed with one coat of Claircolle. Any fungus or mould must be treated with a fungicide and making good and filling should be carried out with a material appropriate to the substrate. Oil Bound Distemper can normally be applied to prepared previously emulsion painted surfaces in normal domestic environments. It is not recommended that distemper be applied to emulsion and other modern paint types in poorly heated and poorly ventilated churches. Seek Technical Advice. Sample trials should be carried out well in advance to ensure that the surface is suitable for application.
Two coats normally recommended. Apply by brush. Cannot be spray applied. Brushes and equipment should be cleaned with warm, soapy water immediately after use. Thinning is not normally necessary for primed or previously painted surfaces. Oil Bound Distemper is temperature sensitive and will thicken in cold conditions. If paint has thickened, it can be returned to the correct consistency by placing in a warm room or standing the can in a bucket of hot water. Only if absolutely necessary dilute by no more than 10% (by volume) with clean water.
2.5 and 5 litre cans. Made to order.
Environmentally friendly product made with natural sustainable ingredients. It contains no VOCs, no petrochemical based ingredients, and no lead. Water-based. All Rose of Jericho paints comply with the latest environmental legislation.
To be used for the decoration of walls. For interior use only. Unpainted porous surfaces should be primed with Claircolle (RJ 4.05). Oil Bound Distemper applied to appropriate surfaces will not readily rub off on clothes. It is not as wipeable as modern vinyl emulsion paints. Distempers should not be over-painted with emulsion or other modern paint types.
10m²/ litre/coat on smooth surface of average porosity.
Limited. Unopened cans have c.12 week shelf life when stored in a cool environment. Protect from frost. Best used within 4 weeks of purchase.
Matt with subtle variations of colour and tone.
Touch dry in 4 hours in good drying conditions. Allow 12 hours between coats.
Ensure Oil Bound Distemper is within shelf life period. All surfaces should be sound, dry, and free from dirt, oil, grease or other contamination. Previously distempered surfaces should be wiped or washed free of any powdery surface material. Unpainted porous surfaces should be primed with one coat of Claircolle. Any fungus or mould must be treated with a fungicide and making good and filling should be carried out with a material appropriate to the substrate. Oil Bound Distemper can normally be applied to prepared previously emulsion painted surfaces in normal domestic environments. It is not recommended that distemper be applied to emulsion and other modern paint types in poorly heated and poorly ventilated churches. Seek Technical Advice. Sample trials should be carried out well in advance to ensure that the surface is suitable for application.
Two coats normally recommended. Apply by brush. Cannot be spray applied. Brushes and equipment should be cleaned with warm, soapy water immediately after use. Thinning is not normally necessary for primed or previously painted surfaces. Oil Bound Distemper is temperature sensitive and will thicken in cold conditions. If paint has thickened, it can be returned to the correct consistency by placing in a warm room or standing the can in a bucket of hot water. Only if absolutely necessary dilute by no more than 10% (by volume) with clean water.
2.5 and 5 litre cans. Made to order.
Environmentally friendly products made with natural sustainable ingredients. They contain no VOCs, no petrochemical-based ingredients, and no lead. Water-based. All Rose of Jericho paints comply with the latest environmental legislation.
Pure Limewash is used for the decoration of porous internal surfaces. It should not be used on cement render, gypsum plaster, timber, or surfaces painted with anything other than limewash.
Approx. 5m²/litre/coat depending upon texture and porosity of surface.
Pure Limewash has unlimited shelf life kept in sealed containers. Protect from heat and frost.
Matt surface coating. Colours are darker in tone when wet.
Sample trials should always be carried out to assess compatibility with substrate. Pure Limewash should be protected from drying too quickly, and from frost before carbonation. It may brush off on clothes. For internal use only – rarely used externally. Casein Bound Limewash (RJ3.02) adheres better to less porous surfaces and is less likely to brush off on clothes, and is therefore often used internally. Coloured limewashes are made using natural earth pigments. Variations due to these pigments and differing porosity of surfaces are inevitable. Much of the charm of a traditional finish is its lack of uniformity with subtle variations of colour and tone.
Pure Limewash requires a surface which is firm, clean, and porous. It can be applied to new lime putty plaster before it has fully dried and carbonated as the permeable nature of a limewash permits carbonation of the plaster beneath to continue. Pure Limewash can be applied to previously limewash painted surfaces, but cannot be applied to other paint types. Previously limewashed surfaces should be thoroughly brushed and washed with a wet sponge to remove dust, dirt and all loose chalky material that is removed readily. Any algae or mould must be treated with an algaecide or fungicide and thoroughly washed off with clean water. Do not use proprietary fungicides containing water repellents. Make good and fill with a compatible filler. Pure Limewash must be applied to damp surfaces. Lime plaster, porous stone and brick must be thoroughly moistened with a mist spray prior to application.
Pure Limewash must be thoroughly mixed, preferably with a mechanical whisk to ensure even distribution of pigments and ingredients immediately before and during use. Limewashing can be messy, and floors etc. should be protected. Protective clothing and goggles must be worn and great care taken especially when limewashing ceilings. Surfaces must be damp. Porous pre-wetted surfaces will need mist-spraying during application to ensure that the limewash does not dry too quickly. Apply the limewash to the damp surface using a brush, not a roller, working it into any cracks. It is applied in thin coats; limewash appears transparent on application and care must be taken to avoid thick build-up which will craze on drying out and may obscure detail. Normally, three coats are required, occasionally more. Each coat must be protected from drying too quickly by regular mist-spraying, and a reasonable time (normally at least 24 hours) allowed between coats. It is important to re-moisten the previous coat with a fine mist spray prior to the application of the next coat.
5 litre cans and 15 litre tubs. Mixed to order.
Environmentally friendly products made with natural sustainable ingredients. They contain no VOCs, no petrochemical-based ingredients, and no lead. Water-based. All Rose of Jericho paints comply with the latest environmental legislation.
Pure Limewash is used for the decoration of porous internal surfaces. It should not be used on cement render, gypsum plaster, timber, or surfaces painted with anything other than limewash.
Approx. 5m²/litre/coat depending upon texture and porosity of surface.
Pure Limewash has unlimited shelf life kept in sealed containers. Protect from heat and frost.
Matt surface coating. Colours are darker in tone when wet.
Sample trials should always be carried out to assess compatibility with substrate. Pure Limewash should be protected from drying too quickly, and from frost before carbonation. It may brush off on clothes. For internal use only – rarely used externally. Casein Bound Limewash (RJ3.02) adheres better to less porous surfaces and is less likely to brush off on clothes, and is therefore often used internally. Coloured limewashes are made using natural earth pigments. Variations due to these pigments and differing porosity of surfaces are inevitable. Much of the charm of a traditional finish is its lack of uniformity with subtle variations of colour and tone.
Pure Limewash requires a surface which is firm, clean, and porous. It can be applied to new lime putty plaster before it has fully dried and carbonated as the permeable nature of a limewash permits carbonation of the plaster beneath to continue. Pure Limewash can be applied to previously limewash painted surfaces, but cannot be applied to other paint types. Previously limewashed surfaces should be thoroughly brushed and washed with a wet sponge to remove dust, dirt and all loose chalky material that is removed readily. Any algae or mould must be treated with an algaecide or fungicide and thoroughly washed off with clean water. Do not use proprietary fungicides containing water repellents. Make good and fill with a compatible filler. Pure Limewash must be applied to damp surfaces. Lime plaster, porous stone and brick must be thoroughly moistened with a mist spray prior to application.
Pure Limewash must be thoroughly mixed, preferably with a mechanical whisk to ensure even distribution of pigments and ingredients immediately before and during use. Limewashing can be messy, and floors etc. should be protected. Protective clothing and goggles must be worn and great care taken especially when limewashing ceilings. Surfaces must be damp. Porous pre-wetted surfaces will need mist-spraying during application to ensure that the limewash does not dry too quickly. Apply the limewash to the damp surface using a brush, not a roller, working it into any cracks. It is applied in thin coats; limewash appears transparent on application and care must be taken to avoid thick build-up which will craze on drying out and may obscure detail. Normally, three coats are required, occasionally more. Each coat must be protected from drying too quickly by regular mist-spraying, and a reasonable time (normally at least 24 hours) allowed between coats. It is important to re-moisten the previous coat with a fine mist spray prior to the application of the next coat.
5 litre cans and 15 litre tubs. Mixed to order.
Environmentally friendly products made with natural sustainable ingredients. They contain no VOCs, no petrochemical-based ingredients, and no lead. Water-based. All Rose of Jericho paints comply with the latest environmental legislation.
Pure Limewash is used for the decoration of porous internal surfaces. It should not be used on cement render, gypsum plaster, timber, or surfaces painted with anything other than limewash.
Approx. 5m²/litre/coat depending upon texture and porosity of surface.
Pure Limewash has unlimited shelf life kept in sealed containers. Protect from heat and frost.
Matt surface coating. Colours are darker in tone when wet.
Sample trials should always be carried out to assess compatibility with substrate. Pure Limewash should be protected from drying too quickly, and from frost before carbonation. It may brush off on clothes. For internal use only – rarely used externally. Casein Bound Limewash (RJ3.02) adheres better to less porous surfaces and is less likely to brush off on clothes, and is therefore often used internally. Coloured limewashes are made using natural earth pigments. Variations due to these pigments and differing porosity of surfaces are inevitable. Much of the charm of a traditional finish is its lack of uniformity with subtle variations of colour and tone.
Pure Limewash requires a surface which is firm, clean, and porous. It can be applied to new lime putty plaster before it has fully dried and carbonated as the permeable nature of a limewash permits carbonation of the plaster beneath to continue. Pure Limewash can be applied to previously limewash painted surfaces, but cannot be applied to other paint types. Previously limewashed surfaces should be thoroughly brushed and washed with a wet sponge to remove dust, dirt and all loose chalky material that is removed readily. Any algae or mould must be treated with an algaecide or fungicide and thoroughly washed off with clean water. Do not use proprietary fungicides containing water repellents. Make good and fill with a compatible filler. Pure Limewash must be applied to damp surfaces. Lime plaster, porous stone and brick must be thoroughly moistened with a mist spray prior to application.
Pure Limewash must be thoroughly mixed, preferably with a mechanical whisk to ensure even distribution of pigments and ingredients immediately before and during use. Limewashing can be messy, and floors etc. should be protected. Protective clothing and goggles must be worn and great care taken especially when limewashing ceilings. Surfaces must be damp. Porous pre-wetted surfaces will need mist-spraying during application to ensure that the limewash does not dry too quickly. Apply the limewash to the damp surface using a brush, not a roller, working it into any cracks. It is applied in thin coats; limewash appears transparent on application and care must be taken to avoid thick build-up which will craze on drying out and may obscure detail. Normally, three coats are required, occasionally more. Each coat must be protected from drying too quickly by regular mist-spraying, and a reasonable time (normally at least 24 hours) allowed between coats. It is important to re-moisten the previous coat with a fine mist spray prior to the application of the next coat.
5 litre cans and 15 litre tubs. Mixed to order.
Limewashes are made with natural sustainable ingredients. They contain no VOCs, no petrochemical based ingredients, and no lead. Water-based. All Rose of Jericho paints comply with the latest environmental legislation. This product contains both a fungicide and an algaecide.
Approx. 6m²/litre/coat depending on texture and porosity of surface.
At least 3 months shelf life when kept cool in sealed containers. Casein limewash must be stored in a cool frost-free environment, away from heat and direct sunlight. Tins and tubs must not be kept in the van in sunny weather and must be moved to a cool/cold environment. Protect from heat and frost
Matt surface coating. Colours are darker in tone when wet.
Casein Limewash is an exterior grade limewash but is also often used internally due to its superior adhesion properties and as it is less likely to brush off on clothes than Pure Limewash. It can be used on less porous surfaces including hydraulic lime based plasters and renders, although sample trials should always be carried out to assess compatibility with substrate. Casein limewash is more compatible with ‘open-textured’ wood or sponge floated plaster and render surfaces than tight smooth steel-trowel polished surfaces. Coloured limewash is made using natural powder pigments. Variations due to these pigments and differing porosity of surfaces are inevitable. Much of the charm of a traditional finish is its lack of uniformity with subtle variations of colour and tone.
Casein Limewash requires a surface that is firm, clean, and porous. It can be applied to new lime plaster and render before it has fully dried and carbonated as the permeable nature of a limewash permits carbonation of the plaster beneath to continue. Casein Limewash can be applied to previously limewash painted surfaces, although sample trials should be undertaken. Previously limewashed surfaces should be thoroughly brushed and washed with a wet sponge to remove dust, dirt and all loose chalky material that is removed readily. Any algae or mould must be treated with an algaecide or fungicide and thoroughly washed off with clean water. Do not use proprietary fungicides containing water repellents. Make good and fill with a compatible material. Casein Limewash should be applied to damp surfaces. Lime plaster and render, porous stone and brick must be thoroughly moistened with a mist spray prior to application.
Ensure limewash is within shelf-life period. Casein Limewash must be thoroughly mixed, preferably with a mechanical whisk, to ensure even distribution of pigments and ingredients immediately before and during use as it readily settles out. Protective clothing and goggles must be worn and great care taken especially when limewashing ceilings. Surfaces must be damp. Porous pre-wetted surfaces may need additional mist-spraying during application to ensure that the limewash does not dry too quickly. Casein limewash must not be applied to sunlit surfaces, and application must be delayed until the wall is in the shade. Apply the limewash to the damp surface using a brush, not a roller, working it into any cracks. It is applied in thin coats - limewash appears transparent on application and care must be taken to avoid thick build-up that will craze on drying out and may obscure detail. Normally, 3 coats are required, occasionally more. Each coat must be protected from drying too quickly by regular mist-spraying, and a reasonable time (at least 24 hours, often longer) allowed between coats. It is normal to mist-spray the previous coat prior to the application of the next coat.
5 litre cans & 15 litre tubs. Limewashes are mixed to order.
Limewashes are made with natural sustainable ingredients. They contain no VOCs, no petrochemical based ingredients, and no lead. Water-based. All Rose of Jericho paints comply with the latest environmental legislation. This product contains both a fungicide and an algaecide
Approx. 6m²/litre/coat depending on texture and porosity of surface.
At least 3 months shelf life when kept cool in sealed containers. Casein limewash must be stored in a cool frost-free environment, away from heat and direct sunlight. Tins and tubs must not be kept in the van in sunny weather and must be moved to a cool/cold environment. Protect from heat and frost.
Matt surface coating. Colours are darker in tone when wet.
Casein Limewash is an exterior grade limewash but is also often used internally due to its superior adhesion properties and as it is less likely to brush off on clothes than Pure Limewash. It can be used on less porous surfaces including hydraulic lime based plasters and renders, although sample trials should always be carried out to assess compatibility with substrate. Casein limewash is more compatible with ‘open-textured’ wood or sponge floated plaster and render surfaces than tight smooth steel-trowel polished surfaces. Coloured limewash is made using natural powder pigments. Variations due to these pigments and differing porosity of surfaces are inevitable. Much of the charm of a traditional finish is its lack of uniformity with subtle variations of colour and tone.
Casein Limewash requires a surface that is firm, clean, and porous. It can be applied to new lime plaster and render before it has fully dried and carbonated as the permeable nature of a limewash permits carbonation of the plaster beneath to continue. Casein Limewash can be applied to previously limewash painted surfaces, although sample trials should be undertaken. Previously limewashed surfaces should be thoroughly brushed and washed with a wet sponge to remove dust, dirt and all loose chalky material that is removed readily. Any algae or mould must be treated with an algaecide or fungicide and thoroughly washed off with clean water. Do not use proprietary fungicides containing water repellents. Make good and fill with a compatible material. Casein Limewash should be applied to damp surfaces. Lime plaster and render, porous stone and brick must be thoroughly moistened with a mist spray prior to application.
Ensure limewash is within shelf-life period. Casein Limewash must be thoroughly mixed, preferably with a mechanical whisk, to ensure even distribution of pigments and ingredients immediately before and during use as it readily settles out. Protective clothing and goggles must be worn and great care taken especially when limewashing ceilings. Surfaces must be damp. Porous pre-wetted surfaces may need additional mist-spraying during application to ensure that the limewash does not dry too quickly. Casein limewash must not be applied to sunlit surfaces, and application must be delayed until the wall is in the shade. Apply the limewash to the damp surface using a brush, not a roller, working it into any cracks. It is applied in thin coats - limewash appears transparent on application and care must be taken to avoid thick build-up that will craze on drying out and may obscure detail. Normally, 3 coats are required, occasionally more. Each coat must be protected from drying too quickly by regular mist-spraying, and a reasonable time (at least 24 hours, often longer) allowed between coats. It is normal to mist-spray the previous coat prior to the application of the next coat.
5 litre cans & 15 litre tubs. Limewashes are mixed to order.
Limewashes are made with natural sustainable ingredients. They contain no VOCs, no petrochemical based ingredients, and no lead. Water-based. All Rose of Jericho paints comply with the latest environmental legislation. This product contains both a fungicide and an algaecide.
Approx. 6m²/litre/coat depending on texture and porosity of surface.
At least 3 months shelf life when kept cool in sealed containers. Casein limewash must be stored in a cool frost-free environment, away from heat and direct sunlight. Tins and tubs must not be kept in the van in sunny weather and must be moved to a cool/cold environment. Protect from heat and frost.
Matt surface coating. Colours are darker in tone when wet.
Casein Limewash is an exterior grade limewash but is also often used internally due to its superior adhesion properties and as it is less likely to brush off on clothes than Pure Limewash. It can be used on less porous surfaces including hydraulic lime based plasters and renders, although sample trials should always be carried out to assess compatibility with substrate. Casein limewash is more compatible with ‘open-textured’ wood or sponge floated plaster and render surfaces than tight smooth steel-trowel polished surfaces. Coloured limewash is made using natural powder pigments. Variations due to these pigments and differing porosity of surfaces are inevitable. Much of the charm of a traditional finish is its lack of uniformity with subtle variations of colour and tone.
Casein Limewash requires a surface that is firm, clean, and porous. It can be applied to new lime plaster and render before it has fully dried and carbonated as the permeable nature of a limewash permits carbonation of the plaster beneath to continue. Casein Limewash can be applied to previously limewash painted surfaces, although sample trials should be undertaken. Previously limewashed surfaces should be thoroughly brushed and washed with a wet sponge to remove dust, dirt and all loose chalky material that is removed readily. Any algae or mould must be treated with an algaecide or fungicide and thoroughly washed off with clean water. Do not use proprietary fungicides containing water repellents. Make good and fill with a compatible material. Casein Limewash should be applied to damp surfaces. Lime plaster and render, porous stone and brick must be thoroughly moistened with a mist spray prior to application.
Ensure limewash is within shelf-life period. Casein Limewash must be thoroughly mixed, preferably with a mechanical whisk, to ensure even distribution of pigments and ingredients immediately before and during use as it readily settles out. Protective clothing and goggles must be worn and great care taken especially when limewashing ceilings. Surfaces must be damp. Porous pre-wetted surfaces may need additional mist-spraying during application to ensure that the limewash does not dry too quickly. Casein limewash must not be applied to sunlit surfaces, and application must be delayed until the wall is in the shade. Apply the limewash to the damp surface using a brush, not a roller, working it into any cracks. It is applied in thin coats - limewash appears transparent on application and care must be taken to avoid thick build-up that will craze on drying out and may obscure detail. Normally, 3 coats are required, occasionally more. Each coat must be protected from drying too quickly by regular mist-spraying, and a reasonable time (at least 24 hours, often longer) allowed between coats. It is normal to mist-spray the previous coat prior to the application of the next coat.
5 litre cans & 15 litre tubs. Limewashes are mixed to order.
Limewashes are made with natural sustainable ingredients. They contain no VOCs, no petrochemical based ingredients, and no lead. Water-based. All Rose of Jericho paints comply with the latest environmental legislation. This product contains both a fungicide and an algaecide.
Tallow Bound Limewash is an exterior grade limewash used for the decoration of lime renders, porous building materials, and previously tallow-limewashed surfaces in the more exposed locations. Tallow Bound Limewash is normally preferred on less porous surfaces.
Approx. 4 –5 m²/litre/coat depending upon texture and porosity of surface.
The tallow tends to coagulate and Tallow Bound Limewash should be used within one week of manufacture. Tallow Bound Limewash must be stored in a cool frost-free environment, away from heat and direct sunlight. Tins and tubs must not be kept in the van in sunny weather and must be moved to a cool or cold environment.
Matt surface coating. Colours are darker in tone when wet.
Less permeable than both Pure Limewash (RJ3.01) and Casein Bound Limewash (RJ3.02). Coarse textured wood or sponge floated surfaces are far preferable to smooth steel-trowel polished surfaces. Sample trials should always be carried out to assess compatibility with substrate. Coloured limewash is made using natural powder pigments. Colour and tone variations due to these pigments and differing porosity of surfaces are inevitable. Much of the charm of a traditional finish is its lack of uniformity with subtle variations of colour and tone.
Tallow Bound Limewash requires a surface that is firm, clean, and porous. It can be applied to new lime render before it has carbonated, but Tallow Bound Limewash is less permeable than Pure or Casein Bound Limewash and will slow the rate of carbonation of the render beneath. Tallow Bound Limewash can be applied to previously tallow-limewash painted surfaces, but not to other paint types. Sample trials should be undertaken. Previously limewashed surfaces should be thoroughly brushed and washed with a wet sponge to remove dust, dirt and all loose, chalky material that is removed readily. All mould and algae must be treated with a fungicidal wash that includes an algaecide and thoroughly washed off with clean water. Do not use fungicides containing water repellents. Make good and fill with a compatible material/filler. Tallow Bound Limewash should be applied to damp surfaces. Lime plaster and render, porous stone and brick must be thoroughly moistened with a mist spray prior to application.
Ensure Tallow Bound Limewash has been made within the previous week. Tallow Bound Limewash must be thoroughly mixed, preferably with a mechanical whisk, to ensure even distribution of pigments and ingredients immediately before and during use as it readily settles out. Protective clothing and goggles must be worn and great care taken. Surfaces must be damp. Porous pre-wetted surfaces may need additional mist-spraying during application to ensure that the limewash does not dry too quickly. Apply the limewash to the damp surface using a brush, not a roller, working it into any cracks. It is applied in thin coats - the limewash appears transparent on application and care must be taken to avoid thick build-up which will craze on drying out and may obscure detail. Normally, 3 coats are required, occasionally more. Each coat must be protected from drying too quickly by regular mist-spraying, and a reasonable time (at least 24 hours, often longer) allowed between coats. It is normal to mist-spray the previous coat prior to the application of the next coat. Limewashing can be messy, and full protection must be provided to all vulnerable adjacent surfaces. In particular, any oak or oak flooring must be fully protected, as the alkali lime permanently stains hardwoods. Newly applied exterior limewash must be fully protected from rain, wind, direct sunlight, frost etc until it has cured and carbonated (normally about 4 weeks).
5 litre cans and 15 litre tubs. Mixed to order.
Limewashes are made with natural sustainable ingredients. They contain no VOCs, no petrochemical based ingredients, and no lead. Water-based. All Rose of Jericho paints comply with the latest environmental legislation. This product contains both a fungicide and an algaecide.
Tallow Bound Limewash is an exterior grade limewash used for the decoration of lime renders, porous building materials, and previously tallow-limewashed surfaces in the more exposed locations. Tallow Bound Limewash is normally preferred on less porous surfaces.
Approx. 4 –5 m²/litre/coat depending upon texture and porosity of surface.
The tallow tends to coagulate and Tallow Bound Limewash should be used within one week of manufacture. Tallow Bound Limewash must be stored in a cool frost-free environment, away from heat and direct sunlight. Tins and tubs must not be kept in the van in sunny weather and must be moved to a cool or cold environment.
Matt surface coating. Colours are darker in tone when wet.
Less permeable than both Pure Limewash (RJ3.01) and Casein Bound Limewash (RJ3.02). Coarse textured wood or sponge floated surfaces are far preferable to smooth steel-trowel polished surfaces. Sample trials should always be carried out to assess compatibility with substrate. Coloured limewash is made using natural powder pigments. Colour and tone variations due to these pigments and differing porosity of surfaces are inevitable. Much of the charm of a traditional finish is its lack of uniformity with subtle variations of colour and tone.
Tallow Bound Limewash requires a surface that is firm, clean, and porous. It can be applied to new lime render before it has carbonated, but Tallow Bound Limewash is less permeable than Pure or Casein Bound Limewash and will slow the rate of carbonation of the render beneath. Tallow Bound Limewash can be applied to previously tallow-limewash painted surfaces, but not to other paint types. Sample trials should be undertaken. Previously limewashed surfaces should be thoroughly brushed and washed with a wet sponge to remove dust, dirt and all loose, chalky material that is removed readily. All mould and algae must be treated with a fungicidal wash that includes an algaecide and thoroughly washed off with clean water. Do not use fungicides containing water repellents. Make good and fill with a compatible material/filler. Tallow Bound Limewash should be applied to damp surfaces. Lime plaster and render, porous stone and brick must be thoroughly moistened with a mist spray prior to application.
Ensure Tallow Bound Limewash has been made within the previous week. Tallow Bound Limewash must be thoroughly mixed, preferably with a mechanical whisk, to ensure even distribution of pigments and ingredients immediately before and during use as it readily settles out. Protective clothing and goggles must be worn and great care taken. Surfaces must be damp. Porous pre-wetted surfaces may need additional mist-spraying during application to ensure that the limewash does not dry too quickly. Apply the limewash to the damp surface using a brush, not a roller, working it into any cracks. It is applied in thin coats - the limewash appears transparent on application and care must be taken to avoid thick build-up which will craze on drying out and may obscure detail. Normally, 3 coats are required, occasionally more. Each coat must be protected from drying too quickly by regular mist-spraying, and a reasonable time (at least 24 hours, often longer) allowed between coats. It is normal to mist-spray the previous coat prior to the application of the next coat. Limewashing can be messy, and full protection must be provided to all vulnerable adjacent surfaces. In particular, any oak or oak flooring must be fully protected, as the alkali lime permanently stains hardwoods. Newly applied exterior limewash must be fully protected from rain, wind, direct sunlight, frost etc until it has cured and carbonated (normally about 4 weeks).
5 litre cans and 15 litre tubs. Mixed to order.
Limewashes are made with natural sustainable ingredients. They contain no VOCs, no petrochemical based ingredients, and no lead. Water-based. All Rose of Jericho paints comply with the latest environmental legislation. This product contains both a fungicide and an algaecide.
Tallow Bound Limewash is an exterior grade limewash used for the decoration of lime renders, porous building materials, and previously tallow-limewashed surfaces in the more exposed locations. Tallow Bound Limewash is normally preferred on less porous surfaces.
Approx. 4 –5 m²/litre/coat depending upon texture and porosity of surface.
The tallow tends to coagulate and Tallow Bound Limewash should be used within one week of manufacture. Tallow Bound Limewash must be stored in a cool frost-free environment, away from heat and direct sunlight. Tins and tubs must not be kept in the van in sunny weather and must be moved to a cool or cold environment.
Matt surface coating. Colours are darker in tone when wet.
Less permeable than both Pure Limewash (RJ3.01) and Casein Bound Limewash (RJ3.02). Coarse textured wood or sponge floated surfaces are far preferable to smooth steel-trowel polished surfaces. Sample trials should always be carried out to assess compatibility with substrate. Coloured limewash is made using natural powder pigments. Colour and tone variations due to these pigments and differing porosity of surfaces are inevitable. Much of the charm of a traditional finish is its lack of uniformity with subtle variations of colour and tone.
Tallow Bound Limewash requires a surface that is firm, clean, and porous. It can be applied to new lime render before it has carbonated, but Tallow Bound Limewash is less permeable than Pure or Casein Bound Limewash and will slow the rate of carbonation of the render beneath. Tallow Bound Limewash can be applied to previously tallow-limewash painted surfaces, but not to other paint types. Sample trials should be undertaken. Previously limewashed surfaces should be thoroughly brushed and washed with a wet sponge to remove dust, dirt and all loose, chalky material that is removed readily. All mould and algae must be treated with a fungicidal wash that includes an algaecide and thoroughly washed off with clean water. Do not use fungicides containing water repellents. Make good and fill with a compatible material/filler. Tallow Bound Limewash should be applied to damp surfaces. Lime plaster and render, porous stone and brick must be thoroughly moistened with a mist spray prior to application.
Ensure Tallow Bound Limewash has been made within the previous week. Tallow Bound Limewash must be thoroughly mixed, preferably with a mechanical whisk, to ensure even distribution of pigments and ingredients immediately before and during use as it readily settles out. Protective clothing and goggles must be worn and great care taken. Surfaces must be damp. Porous pre-wetted surfaces may need additional mist-spraying during application to ensure that the limewash does not dry too quickly. Apply the limewash to the damp surface using a brush, not a roller, working it into any cracks. It is applied in thin coats - the limewash appears transparent on application and care must be taken to avoid thick build-up which will craze on drying out and may obscure detail. Normally, 3 coats are required, occasionally more. Each coat must be protected from drying too quickly by regular mist-spraying, and a reasonable time (at least 24 hours, often longer) allowed between coats. It is normal to mist-spray the previous coat prior to the application of the next coat. Limewashing can be messy, and full protection must be provided to all vulnerable adjacent surfaces. In particular, any oak or oak flooring must be fully protected, as the alkali lime permanently stains hardwoods. Newly applied exterior limewash must be fully protected from rain, wind, direct sunlight, frost etc until it has cured and carbonated (normally about 4 weeks).
5 litre cans and 15 litre tubs. Mixed to order.
Contains no added lead. Water-based. Actual VOC content <5g>
To be used for the decoration of walls and ceilings. For interior use only. Porous surfaces may need priming with a diluted mist-coat of permeable emulsion normally thinned with 10% water prior to the application of further full coats. Permeable Matt Emulsion is not as wipeable as modern vinyl emulsion paints.
12-14 m²/litre/coat on smooth surface of average porosity.
Matt, chalky finish with subtle variations in colour and tone. All Rose of Jericho paints are made using powder pigments. Colour and tone variations due to these pigments and differing porosity of surfaces are inevitable. The intention is that our emulsion paints possess some of the lack of uniformity and charm of a traditional limewash or distemper paint finish.
Do not apply in temperatures below 5C and avoid using during periods of high humidity. Do not use on surfaces previously painted with oil-based paints, limewashes or distempers.
All surfaces should be sound, clean, dry, and free from dirt, oil, grease or other contamination. Permeable Matt Emulsion can be applied to lining paper and previously emulsion painted surfaces. Newly plastered surfaces should be dry prior to application. Porous surfaces should be primed with a mist coat of paint diluted with up to 10% water. Any algae or mould must be treated with a fungicide and making good and filling should be carried out with a material appropriate to the substrate It is recommended that a trial is carried out to ensure that the surface is suitable for application.
Stir well before use. Permeable Matt Emulsion is best applied by brush. Two full coats recommended. Thinning should not be necessary for primed or previously painted surfaces. Very porous surfaces may benefit from a light mist-spraying immediately prior to application. Only if absolutely necessary dilute by no more than 10% water and whisk thoroughly. Brushes and equipment should be cleaned with warm, soapy water immediately after use.
2.5 and 5 litre cans. Mixed to order.
Contains no added lead. Water-based. Actual VOC content <5g>
To be used for the decoration of walls and ceilings. For interior use only. Porous surfaces may need priming with a diluted mist-coat of permeable emulsion normally thinned with 10% water prior to the application of further full coats. Permeable Matt Emulsion is not as wipeable as modern vinyl emulsion paints.
12-14 m²/litre/coat on smooth surface of average porosity.
Matt, chalky finish with subtle variations in colour and tone. All Rose of Jericho paints are made using powder pigments. Colour and tone variations due to these pigments and differing porosity of surfaces are inevitable. The intention is that our emulsion paints possess some of the lack of uniformity and charm of a traditional limewash or distemper paint finish.
Do not apply in temperatures below 5C and avoid using during periods of high humidity. Do not use on surfaces previously painted with oil-based paints, limewashes or distempers.
All surfaces should be sound, clean, dry, and free from dirt, oil, grease or other contamination. Permeable Matt Emulsion can be applied to lining paper and previously emulsion painted surfaces. Newly plastered surfaces should be dry prior to application. Porous surfaces should be primed with a mist coat of paint diluted with up to 10% water. Any algae or mould must be treated with a fungicide and making good and filling should be carried out with a material appropriate to the substrate It is recommended that a trial is carried out to ensure that the surface is suitable for application.
Stir well before use. Permeable Matt Emulsion is best applied by brush. Two full coats recommended. Thinning should not be necessary for primed or previously painted surfaces. Very porous surfaces may benefit from a light mist-spraying immediately prior to application. Only if absolutely necessary dilute by no more than 10% water and whisk thoroughly. Brushes and equipment should be cleaned with warm, soapy water immediately after use.
2.5 and 5 litre cans. Mixed to order.
Contains no added lead. Water-based. Actual VOC content <5g>
To be used for the decoration of walls and ceilings. For interior use only. Porous surfaces may need priming with a diluted mist-coat of permeable emulsion normally thinned with 10% water prior to the application of further full coats. Permeable Matt Emulsion is not as wipeable as modern vinyl emulsion paints.
12-14 m²/litre/coat on smooth surface of average porosity.
Matt, chalky finish with subtle variations in colour and tone. All Rose of Jericho paints are made using powder pigments. Colour and tone variations due to these pigments and differing porosity of surfaces are inevitable. The intention is that our emulsion paints possess some of the lack of uniformity and charm of a traditional limewash or distemper paint finish.
Do not apply in temperatures below 5C and avoid using during periods of high humidity. Do not use on surfaces previously painted with oil-based paints, limewashes or distempers.
All surfaces should be sound, clean, dry, and free from dirt, oil, grease or other contamination. Permeable Matt Emulsion can be applied to lining paper and previously emulsion painted surfaces. Newly plastered surfaces should be dry prior to application. Porous surfaces should be primed with a mist coat of paint diluted with up to 10% water. Any algae or mould must be treated with a fungicide and making good and filling should be carried out with a material appropriate to the substrate It is recommended that a trial is carried out to ensure that the surface is suitable for application.
Stir well before use. Permeable Matt Emulsion is best applied by brush. Two full coats recommended. Thinning should not be necessary for primed or previously painted surfaces. Very porous surfaces may benefit from a light mist-spraying immediately prior to application. Only if absolutely necessary dilute by no more than 10% water and whisk thoroughly. Brushes and equipment should be cleaned with warm, soapy water immediately after use.
2.5 and 5 litre cans. Mixed to order.
Contains no added lead. Water-based. Actual VOC content <5g>
To be used for the decoration of walls and ceilings. For interior use only. Porous surfaces may need priming with a diluted mist-coat of permeable emulsion normally thinned with 10% water prior to the application of further full coats. Permeable Matt Emulsion is not as wipeable as modern vinyl emulsion paints.
12-14 m²/litre/coat on smooth surface of average porosity.
Matt, chalky finish with subtle variations in colour and tone. All Rose of Jericho paints are made using powder pigments. Colour and tone variations due to these pigments and differing porosity of surfaces are inevitable. The intention is that our emulsion paints possess some of the lack of uniformity and charm of a traditional limewash or distemper paint finish.
Do not apply in temperatures below 5C and avoid using during periods of high humidity. Do not use on surfaces previously painted with oil-based paints, limewashes or distempers.
All surfaces should be sound, clean, dry, and free from dirt, oil, grease or other contamination. Permeable Matt Emulsion can be applied to lining paper and previously emulsion painted surfaces. Newly plastered surfaces should be dry prior to application. Porous surfaces should be primed with a mist coat of paint diluted with up to 10% water. Any algae or mould must be treated with a fungicide and making good and filling should be carried out with a material appropriate to the substrate It is recommended that a trial is carried out to ensure that the surface is suitable for application.
Stir well before use. Permeable Matt Emulsion is best applied by brush. Two full coats recommended. Thinning should not be necessary for primed or previously painted surfaces. Very porous surfaces may benefit from a light mist-spraying immediately prior to application. Only if absolutely necessary dilute by no more than 10% water and whisk thoroughly. Brushes and equipment should be cleaned with warm, soapy water immediately after use.
2.5 and 5 litre cans. Mixed to order.
Contains no added lead. Water-based. Actual VOC content <5g>
To be used for the decoration of walls and ceilings. For interior use only. Porous surfaces may need priming with a mist coat of vinyl matt emulsion thinned with up to 10% water prior to the application of further coats. Rose of Jericho Vinyl Matt Emulsion is not as wipeable as modern vinyl emulsion paints.
12-14 m²/ litre/coat on smooth surface of average porosity.
Matt, chalky finish with subtle variations in colour and tone. All Rose of Jericho paints are made using powder pigments. Colour and tone variations due to these pigments and differing porosity of surfaces are inevitable. The intention is that our emulsion paints possess some of the lack of uniformity and charm of a traditional limewash or distemper paint finish.
Do not apply in temperatures below 5C and avoid using during periods of high humidity. Do not use on surfaces previously painted with oil-based paints, limewashes or distempers.
All surfaces should be sound, clean, dry, and free from dirt, oil, grease or other contamination. Vinyl Matt Emulsion can be applied to lining paper and previously emulsion painted surfaces. Porous surfaces should be primed with a mist coat of paint diluted with up to 10% water. Any algae or mould must be treated with a fungicide and making good and filling should be carried out with a material appropriate to the substrate. It is recommended that a trial be carried out to ensure that the surface is suitable for application.
Stir well before use. Vinyl Matt Emulsion is best applied by brush. Two full coats recommended. Thinning is not normally necessary for primed or previously painted surfaces. Coverage. 12-14 m2/ litre/coat on smooth surface of average porosity. Brushes and equipment should be cleaned with warm, soapy water immediately after use.
2.5 and 5 litre cans. Mixed to order.
Contains no added lead. Water-based. Actual VOC content <5g>
To be used for the decoration of walls and ceilings. For interior use only. Porous surfaces may need priming with a mist coat of vinyl matt emulsion thinned with up to 10% water prior to the application of further coats. Rose of Jericho Vinyl Matt Emulsion is not as wipeable as modern vinyl emulsion paints.
12-14 m²/ litre/coat on smooth surface of average porosity.
Matt, chalky finish with subtle variations in colour and tone. All Rose of Jericho paints are made using powder pigments. Colour and tone variations due to these pigments and differing porosity of surfaces are inevitable. The intention is that our emulsion paints possess some of the lack of uniformity and charm of a traditional limewash or distemper paint finish.
All surfaces should be sound, clean, dry, and free from dirt, oil, grease or other contamination. Vinyl Matt Emulsion can be applied to lining paper and previously emulsion painted surfaces. Porous surfaces should be primed with a mist coat of paint diluted with up to 10% water. Any algae or mould must be treated with a fungicide and making good and filling should be carried out with a material appropriate to the substrate. It is recommended that a trial be carried out to ensure that the surface is suitable for application.
Stir well before use. Vinyl Matt Emulsion is best applied by brush. Two full coats recommended. Thinning is not normally necessary for primed or previously painted surfaces. Coverage. 12-14 m2/ litre/coat on smooth surface of average porosity. Brushes and equipment should be cleaned with warm, soapy water immediately after use.
2.5 and 5 litre cans. Mixed to order.
Contains no added lead. Water-based. Actual VOC content <5g>
To be used for the decoration of walls and ceilings. For interior use only. Porous surfaces may need priming with a mist coat of vinyl matt emulsion thinned with up to 10% water prior to the application of further coats. Rose of Jericho Vinyl Matt Emulsion is not as wipeable as modern vinyl emulsion paints.
12-14 m²/ litre/coat on smooth surface of average porosity.
Matt, chalky finish with subtle variations in colour and tone. All Rose of Jericho paints are made using powder pigments. Colour and tone variations due to these pigments and differing porosity of surfaces are inevitable. The intention is that our emulsion paints possess some of the lack of uniformity and charm of a traditional limewash or distemper paint finish.
All surfaces should be sound, clean, dry, and free from dirt, oil, grease or other contamination. Vinyl Matt Emulsion can be applied to lining paper and previously emulsion painted surfaces. Porous surfaces should be primed with a mist coat of paint diluted with up to 10% water. Any algae or mould must be treated with a fungicide and making good and filling should be carried out with a material appropriate to the substrate. It is recommended that a trial be carried out to ensure that the surface is suitable for application.
Stir well before use. Vinyl Matt Emulsion is best applied by brush. Two full coats recommended. Thinning is not normally necessary for primed or previously painted surfaces. Coverage. 12-14 m2/ litre/coat on smooth surface of average porosity. Brushes and equipment should be cleaned with warm, soapy water immediately after use.
2.5 and 5 litre cans. Mixed to order
Contains no added lead. Water-based. Actual VOC content <5g>
To be used for the decoration of walls and ceilings. For interior use only. Porous surfaces may need priming with a mist coat of vinyl matt emulsion thinned with up to 10% water prior to the application of further coats. Rose of Jericho Vinyl Matt Emulsion is not as wipeable as modern vinyl emulsion paints.
12-14 m²/ litre/coat on smooth surface of average porosity.
Matt, chalky finish with subtle variations in colour and tone. All Rose of Jericho paints are made using powder pigments. Colour and tone variations due to these pigments and differing porosity of surfaces are inevitable. The intention is that our emulsion paints possess some of the lack of uniformity and charm of a traditional limewash or distemper paint finish.
All surfaces should be sound, clean, dry, and free from dirt, oil, grease or other contamination. Vinyl Matt Emulsion can be applied to lining paper and previously emulsion painted surfaces. Porous surfaces should be primed with a mist coat of paint diluted with up to 10% water. Any algae or mould must be treated with a fungicide and making good and filling should be carried out with a material appropriate to the substrate. It is recommended that a trial be carried out to ensure that the surface is suitable for application.
Stir well before use. Vinyl Matt Emulsion is best applied by brush. Two full coats recommended. Thinning is not normally necessary for primed or previously painted surfaces. Coverage. 12-14 m2/ litre/coat on smooth surface of average porosity. Brushes and equipment should be cleaned with warm, soapy water immediately after use.
2.5 and 5 litre cans. Mixed to order.
Contains no added lead. Water-based. Actual VOC content <5g>
To be used for the exterior decoration of dry cement renders, pebble-dash and modern building materials. Porous surfaces may need priming with a stabilising solution or a coat of exterior emulsion thinned with up to 15% clean water prior to the application of further coats.
12-14 m²/litre/coat on smooth surfaces. 4-8 m2/ litre/coat on textured surfaces of low porosity.
Matt finish with subtle variations in colour and tone. All Rose of Jericho paints are made using powder pigments. Colour and tone variations due to these pigments and differing porosity of surfaces are inevitable. The intention is that our Exterior Emulsion paint possesses some of the lack of uniformity and charm of a traditional limewash finish.
All surfaces should be sound, clean, dry, and free from loose or defective paint, dirt, or other contamination. Porous surfaces should be primed with a coat of exterior emulsion diluted with up to 15% clean water. A stabilising solution may be necessary. Any mould, algae or moss must be treated with a fungicidal wash and making good and filling should be carried out with a material appropriate to the substrate. It is recommended that a trial be carried out to ensure that the surface is suitable for application.
Stir well before use. Apply by brush, roller, or spray. Final coat best applied by masonry brush. Two full coats normally recommended. Thinning is not normally necessary for primed or previously painted surfaces. Approx. Coverage. 12-14 m2/ litre/ coat on smooth surface of low porosity. 4-6 m2/ litre/ coat on textured surfaces of low porosity. Brushes and equipment should be cleaned with warm, soapy water immediately after use.
2.5 and 5 litre tins. Made to order.
Contains no added lead. Water-based. Actual VOC content <5g>
To be used for the exterior decoration of dry cement renders, pebble-dash and modern building materials. Porous surfaces may need priming with a stabilising solution or a coat of exterior emulsion thinned with up to 15% clean water prior to the application of further coats.
12-14 m²/litre/coat on smooth surfaces. 4-8 m2/ litre/coat on textured surfaces of low porosity.
Matt finish with subtle variations in colour and tone. All Rose of Jericho paints are made using powder pigments. Colour and tone variations due to these pigments and differing porosity of surfaces are inevitable. The intention is that our Exterior Emulsion paint possesses some of the lack of uniformity and charm of a traditional limewash finish.
All surfaces should be sound, clean, dry, and free from loose or defective paint, dirt, or other contamination. Porous surfaces should be primed with a coat of exterior emulsion diluted with up to 15% clean water. A stabilising solution may be necessary. Any mould, algae or moss must be treated with a fungicidal wash and making good and filling should be carried out with a material appropriate to the substrate. It is recommended that a trial be carried out to ensure that the surface is suitable for application.
Stir well before use. Apply by brush, roller, or spray. Final coat best applied by masonry brush. Two full coats normally recommended. Thinning is not normally necessary for primed or previously painted surfaces. Approx. Coverage. 12-14 m2/ litre/ coat on smooth surface of low porosity. 4-6 m2/ litre/ coat on textured surfaces of low porosity. Brushes and equipment should be cleaned with warm, soapy water immediately after use.
2.5 and 5 litre tins. Mixed to order.
Contains no added lead. Water-based. Actual VOC content <5g>
To be used for the exterior decoration of dry cement renders, pebble-dash and modern building materials. Porous surfaces may need priming with a stabilising solution or a coat of exterior emulsion thinned with up to 15% clean water prior to the application of further coats.
12-14 m²/litre/coat on smooth surfaces. 4-8 m²/ litre/coat on textured surfaces of low porosity.
Matt finish with subtle variations in colour and tone. All Rose of Jericho paints are made using powder pigments. Colour and tone variations due to these pigments and differing porosity of surfaces are inevitable. The intention is that our Exterior Emulsion paint possesses some of the lack of uniformity and charm of a traditional limewash finish.
All surfaces should be sound, clean, dry, and free from loose or defective paint, dirt, or other contamination. Porous surfaces should be primed with a coat of exterior emulsion diluted with up to 15% clean water. A stabilising solution may be necessary. Any mould, algae or moss must be treated with a fungicidal wash and making good and filling should be carried out with a material appropriate to the substrate. It is recommended that a trial be carried out to ensure that the surface is suitable for application.
Stir well before use. Apply by brush, roller, or spray. Final coat best applied by masonry brush. Two full coats normally recommended. Thinning is not normally necessary for primed or previously painted surfaces. Approx. Coverage. 12-14 m²/ litre/ coat on smooth surface of low porosity. 4-6 m²/ litre/ coat on textured surfaces of low porosity. Brushes and equipment should be cleaned with warm, soapy water immediately after use.
2.5 and 5 litre cans. Made to order.
Contains no added lead. Water-based. Actual VOC content <5g>
To be used for the exterior decoration of dry cement renders, pebble-dash and modern building materials. Porous surfaces may need priming with a stabilising solution or a coat of exterior emulsion thinned with up to 15% clean water prior to the application of further coats.
12-14 m²/litre/coat on smooth surfaces. 4-8 m²/ litre/coat on textured surfaces of low porosity.
Matt finish with subtle variations in colour and tone. All Rose of Jericho paints are made using powder pigments. Colour and tone variations due to these pigments and differing porosity of surfaces are inevitable. The intention is that our Exterior Emulsion paint possesses some of the lack of uniformity and charm of a traditional limewash finish.
All surfaces should be sound, clean, dry, and free from loose or defective paint, dirt, or other contamination. Porous surfaces should be primed with a coat of exterior emulsion diluted with up to 15% clean water. A stabilising solution may be necessary. Any mould, algae or moss must be treated with a fungicidal wash and making good and filling should be carried out with a material appropriate to the substrate. It is recommended that a trial be carried out to ensure that the surface is suitable for application.
Stir well before use. Apply by brush, roller, or spray. Final coat best applied by masonry brush. Two full coats normally recommended. Thinning is not normally necessary for primed or previously painted surfaces. Approx. Coverage. 12-14 m²/ litre/ coat on smooth surface of low porosity. 4-6 m²/ litre/ coat on textured surfaces of low porosity. Brushes and equipment should be cleaned with warm, soapy water immediately after use.
2.5 and 5 litre tins. Mixed to order.
Contains no added lead. Actual VOC content <5g>
Normally used for the decoration of joinery and woodwork. For interior use only. Rose of Jericho Water Based Eggshell is not as wipeable as Oil Eggshell.
12-14 m²/litre/coat on smooth surfaces of low porosity.
Mid-sheen with subtle variations in colour and tone. All Rose of Jericho paints are made using powder pigments. Colour and tone variations due to these pigments and differing porosity of surfaces are inevitable. The intention is that our eggshell paints possess the lack of uniformity and charm of traditional oil paints.
Touch dry in 2 hours in good drying conditions. Allow 18 hours between coats. Ensure adequate ventilation during the drying period. Do not apply in temperatures below 8°C or in damp or humid conditions. Only rarely used for the decorations of walls and ceilings. Use in good natural ventilation and wear protective clothing and equipment.
All surfaces should be sound, dry, clean, and free from dirt, oil, grease or other contamination. New woodwork should be primed with an appropriate acrylic wood primer. Existing paintwork in sound condition should be washed down with a warm water detergent solution and abraded. It is recommended that trials be carried out well in advance to ensure that the surface is suitable for application.
Stir gently before use. Water Based Eggshell is best applied by brush. Two coats normally recommended. Thinning is not normally necessary for primed or previously painted surfaces. Where necessary, thin with up to 10% clean water by volume. Coverage. c. 12 m²/litre/coat on smooth surfaces of low porosity. Brushes and equipment should be cleaned with warm soapy water immediately after use.
1 and 2.5 litre cans. Mixed to order.
Contains no added lead. Actual VOC content <5g>
Normally used for the decoration of joinery and woodwork. For interior use only. Rose of Jericho Water Based Eggshell is not as wipeable as Oil Eggshell.
12-14 m²/litre/coat on smooth surfaces of low porosity.
Mid-sheen with subtle variations in colour and tone. All Rose of Jericho paints are made using powder pigments. Colour and tone variations due to these pigments and differing porosity of surfaces are inevitable. The intention is that our eggshell paints possess the lack of uniformity and charm of traditional oil paints.
Touch dry in 2 hours in good drying conditions. Allow 18 hours between coats. Ensure adequate ventilation during the drying period. Do not apply in temperatures below 8°C or in damp or humid conditions. Only rarely used for the decorations of walls and ceilings. Use in good natural ventilation and wear protective clothing and equipment.
All surfaces should be sound, dry, clean, and free from dirt, oil, grease or other contamination. New woodwork should be primed with an appropriate acrylic wood primer. Existing paintwork in sound condition should be washed down with a warm water detergent solution and abraded. It is recommended that trials be carried out well in advance to ensure that the surface is suitable for application.
Stir gently before use. Water Based Eggshell is best applied by brush. Two coats normally recommended. Thinning is not normally necessary for primed or previously painted surfaces. Where necessary, thin with up to 10% clean water by volume. Coverage. c. 12 m²/litre/coat on smooth surfaces of low porosity. Brushes and equipment should be cleaned with warm soapy water immediately after use.
1 and 2.5 litre cans. Mixed to order.
Contains no added lead. Actual VOC content <5g>
Normally used for the decoration of joinery and woodwork. For interior use only. Rose of Jericho Water Based Eggshell is not as wipeable as Oil Eggshell.
12-14 m²/litre/coat on smooth surfaces of low porosity.
Mid-sheen with subtle variations in colour and tone. All Rose of Jericho paints are made using powder pigments. Colour and tone variations due to these pigments and differing porosity of surfaces are inevitable. The intention is that our eggshell paints possess the lack of uniformity and charm of traditional oil paints.
Touch dry in 2 hours in good drying conditions. Allow 18 hours between coats. Ensure adequate ventilation during the drying period. Do not apply in temperatures below 8°C or in damp or humid conditions. Only rarely used for the decorations of walls and ceilings. Use in good natural ventilation and wear protective clothing and equipment.
All surfaces should be sound, dry, clean, and free from dirt, oil, grease or other contamination. New woodwork should be primed with an appropriate acrylic wood primer. Existing paintwork in sound condition should be washed down with a warm water detergent solution and abraded. It is recommended that trials be carried out well in advance to ensure that the surface is suitable for application.
Stir gently before use. Water Based Eggshell is best applied by brush. Two coats normally recommended. Thinning is not normally necessary for primed or previously painted surfaces. Where necessary, thin with up to 10% clean water by volume. Coverage. c. 12 m²/litre/coat on smooth surfaces of low porosity. Brushes and equipment should be cleaned with warm soapy water immediately after use.
1 and 2.5 litre cans. Mixed to order.
Contains no added lead. Actual VOC content <5g>
Normally used for the decoration of joinery and woodwork. For interior use only. Rose of Jericho Water Based Eggshell is not as wipeable as Oil Eggshell.
12-14 m²/litre/coat on smooth surfaces of low porosity.
Mid-sheen with subtle variations in colour and tone. All Rose of Jericho paints are made using powder pigments. Colour and tone variations due to these pigments and differing porosity of surfaces are inevitable. The intention is that our eggshell paints possess the lack of uniformity and charm of traditional oil paints.
Touch dry in 2 hours in good drying conditions. Allow 18 hours between coats. Ensure adequate ventilation during the drying period. Do not apply in temperatures below 8°C or in damp or humid conditions. Only rarely used for the decorations of walls and ceilings. Use in good natural ventilation and wear protective clothing and equipment.
All surfaces should be sound, dry, clean, and free from dirt, oil, grease or other contamination. New woodwork should be primed with an appropriate acrylic wood primer. Existing paintwork in sound condition should be washed down with a warm water detergent solution and abraded. It is recommended that trials be carried out well in advance to ensure that the surface is suitable for application.
Stir gently before use. Water Based Eggshell is best applied by brush. Two coats normally recommended. Thinning is not normally necessary for primed or previously painted surfaces. Where necessary, thin with up to 10% clean water by volume. Coverage. c. 12 m²/litre/coat on smooth surfaces of low porosity. Brushes and equipment should be cleaned with warm soapy water immediately after use.
1 and 2.5 litre cans. Mixed to order.
Contains no added lead. Actual VOC content <299g>
To be used for the decoration of joinery and woodwork. For interior use only.
12-14 m2/litre/coat on smooth surfaces.
Mid-sheen with subtle variations in colour and tone. All Rose of Jericho paints are made using powder pigments. Colour and tone variations due to these pigments and differing porosity of surfaces are inevitable. The intention is that our oil paints possess the lack of uniformity and charm of traditional oil paints.
Touch dry in 4 hours in good drying conditions. Allow 18 hours between coats. Ensure adequate ventilation during the drying period. Do not apply in temperatures below 5°C or in damp or humid conditions. Flammable. Keep away from sources of ignition. Use in good natural ventilation and wear protective clothing and equipment.
All surfaces should be sound, dry, clean, and free from dirt, oil, grease or other contamination. New woodwork should be primed with an oil-based wood primer. Existing paintwork in sound condition should be washed down with a warm water detergent solution, thoroughly rinsed off and then lightly abraded. It is recommended that trials be carried out well in advance to ensure that the surface is suitable for application.
Stir thoroughly before use. Oil Based Eggshell is best applied by brush. Maintain wet edge. Two full coats normally recommended. Thinning should not be necessary for primed or previously painted surfaces. Only if absolutely necessary dilute by no more than 10% genuine turpentine or white spirit and stir thoroughly.
1 and 2.5 litre cans. Mixed to order.
Contains no added lead. Actual VOC content <299g>
To be used for the decoration of joinery and woodwork. For interior use only.
12-14 m²/litre/coat on smooth surfaces.
Mid-sheen with subtle variations in colour and tone. All Rose of Jericho paints are made using powder pigments. Colour and tone variations due to these pigments and differing porosity of surfaces are inevitable. The intention is that our oil paints possess the lack of uniformity and charm of traditional oil paints.
Touch dry in 4 hours in good drying conditions. Allow 18 hours between coats. Ensure adequate ventilation during the drying period. Do not apply in temperatures below 5°C or in damp or humid conditions. Flammable. Keep away from sources of ignition. Use in good natural ventilation and wear protective clothing and equipment.
All surfaces should be sound, dry, clean, and free from dirt, oil, grease or other contamination. New woodwork should be primed with an oil-based wood primer. Existing paintwork in sound condition should be washed down with a warm water detergent solution, thoroughly rinsed off and then lightly abraded. It is recommended that trials be carried out well in advance to ensure that the surface is suitable for application.
Stir thoroughly before use. Oil Based Eggshell is best applied by brush. Maintain wet edge. Two full coats normally recommended. Thinning should not be necessary for primed or previously painted surfaces. Only if absolutely necessary dilute by no more than 10% genuine turpentine or white spirit and stir thoroughly.
1 and 2.5 litre cans. Mixed to order.
Contains no added lead. Actual VOC content <299g>
To be used for the decoration of joinery and woodwork. For interior use only.
12-14 m²/litre/coat on smooth surfaces.
Mid-sheen with subtle variations in colour and tone. All Rose of Jericho paints are made using powder pigments. Colour and tone variations due to these pigments and differing porosity of surfaces are inevitable. The intention is that our oil paints possess the lack of uniformity and charm of traditional oil paints.
Touch dry in 4 hours in good drying conditions. Allow 18 hours between coats. Ensure adequate ventilation during the drying period. Do not apply in temperatures below 5°C or in damp or humid conditions. Flammable. Keep away from sources of ignition. Use in good natural ventilation and wear protective clothing and equipment.
All surfaces should be sound, dry, clean, and free from dirt, oil, grease or other contamination. New woodwork should be primed with an oil-based wood primer. Existing paintwork in sound condition should be washed down with a warm water detergent solution, thoroughly rinsed off and then lightly abraded. It is recommended that trials be carried out well in advance to ensure that the surface is suitable for application.
Stir thoroughly before use. Oil Based Eggshell is best applied by brush. Maintain wet edge. Two full coats normally recommended. Thinning should not be necessary for primed or previously painted surfaces. Only if absolutely necessary dilute by no more than 10% genuine turpentine or white spirit and stir thoroughly.
1 and 2.5 litre cans. Mixed to order.
Contains no added lead. Actual VOC content <299g>
To be used for the decoration of joinery and woodwork. For interior use only.
12-14 m²/ litre/coat on smooth surfaces.
Mid-sheen with subtle variations in colour and tone. All Rose of Jericho paints are made using powder pigments. Colour and tone variations due to these pigments and differing porosity of surfaces are inevitable. The intention is that our oil paints possess the lack of uniformity and charm of traditional oil paints.
Touch dry in 4 hours in good drying conditions. Allow 18 hours between coats. Ensure adequate ventilation during the drying period. Do not apply in temperatures below 5°C or in damp or humid conditions. Flammable. Keep away from sources of ignition. Use in good natural ventilation and wear protective clothing and equipment.
All surfaces should be sound, dry, clean, and free from dirt, oil, grease or other contamination. New woodwork should be primed with an oil-based wood primer. Existing paintwork in sound condition should be washed down with a warm water detergent solution, thoroughly rinsed off and then lightly abraded. It is recommended that trials be carried out well in advance to ensure that the surface is suitable for application.
Stir thoroughly before use. Oil Based Eggshell is best applied by brush. Maintain wet edge. Two full coats normally recommended. Thinning should not be necessary for primed or previously painted surfaces. Only if absolutely necessary dilute by no more than 10% genuine turpentine or white spirit and stir thoroughly.
1 and 2.5 litre cans. Mixed to order.
Contains no added lead. Actual VOC content <299g>
To be used for the decoration of low-usage joinery and woodwork such as panelling. For interior use only. Flat Oil is not as wipeable as modern gloss or eggshell oil paints.
12-14 m²/ litre/coat on smooth surfaces.
Matt finish with subtle variations in colour and tone. All Rose of Jericho paints are made using powder pigments. Colour and tone variations due to these pigments and differing porosity of surfaces are inevitable. The intention is that our oil paints possess the lack of uniformity and charm of traditional oil paints.
Touch dry in 6 hours in good drying conditions: Touch dry in 6 hours. Allow 18 hours between coats. Ensure adequate ventilation during the drying period. Do not apply in temperatures below 8°C or in damp or humid conditions. Only rarely used for the decorations of walls and ceilings. Flammable. Keep away from sources of ignition. Use in good natural ventilation and wear protective clothing and equipment.
All surfaces should be sound, dry, clean, and free from dirt, oil, grease or other contamination. New woodwork should be primed with an oil-based wood primer. Existing paintwork in sound condition should be washed down with a warm water detergent solution and abraded. It is recommended that trials be carried out well in advance to ensure that the surface is suitable for application.
Stir thoroughly before use. Flat Oil is best applied by brush. Maintain wet edge. Two coats normally recommended. Thinning is not normally necessary for primed or previously painted surfaces. Thin with white spirit if necessary. Coverage: 16 sq. metres per litre on smooth surface of low porosity. Brushes and equipment should be cleaned with white spirit immediately after use.
1 and 2.5 litre cans. Mixed to order.
Contains no added lead. Actual VOC content <299g>
To be used for the decoration of low-usage joinery and woodwork such as panelling. For interior use only. Flat Oil is not as wipeable as modern gloss or eggshell oil paints.
12-14 m²/ litre/coat on smooth surfaces.
Matt finish with subtle variations in colour and tone. All Rose of Jericho paints are made using powder pigments. Colour and tone variations due to these pigments and differing porosity of surfaces are inevitable. The intention is that our oil paints possess the lack of uniformity and charm of traditional oil paints.
Touch dry in 6 hours in good drying conditions: Touch dry in 6 hours. Allow 18 hours between coats. Ensure adequate ventilation during the drying period. Do not apply in temperatures below 8°C or in damp or humid conditions. Only rarely used for the decorations of walls and ceilings. Flammable. Keep away from sources of ignition. Use in good natural ventilation and wear protective clothing and equipment.
All surfaces should be sound, dry, clean, and free from dirt, oil, grease or other contamination. New woodwork should be primed with an oil-based wood primer. Existing paintwork in sound condition should be washed down with a warm water detergent solution and abraded. It is recommended that trials be carried out well in advance to ensure that the surface is suitable for application.
Stir thoroughly before use. Flat Oil is best applied by brush. Maintain wet edge. Two coats normally recommended. Thinning is not normally necessary for primed or previously painted surfaces. Thin with white spirit if necessary. Coverage: 16 sq. metres per litre on smooth surface of low porosity. Brushes and equipment should be cleaned with white spirit immediately after use.
1 and 2.5 litre cans. Mixed to order.
Contains no added lead. Actual VOC content <299g>
To be used for the decoration of low-usage joinery and woodwork such as panelling. For interior use only. Flat Oil is not as wipeable as modern gloss or eggshell oil paints.
12-14 m²/ litre/coat on smooth surfaces.
Matt finish with subtle variations in colour and tone. All Rose of Jericho paints are made using powder pigments. Colour and tone variations due to these pigments and differing porosity of surfaces are inevitable. The intention is that our oil paints possess the lack of uniformity and charm of traditional oil paints.
Touch dry in 6 hours in good drying conditions: Touch dry in 6 hours. Allow 18 hours between coats. Ensure adequate ventilation during the drying period. Do not apply in temperatures below 8°C or in damp or humid conditions. Only rarely used for the decorations of walls and ceilings. Flammable. Keep away from sources of ignition. Use in good natural ventilation and wear protective clothing and equipment.
All surfaces should be sound, dry, clean, and free from dirt, oil, grease or other contamination. New woodwork should be primed with an oil-based wood primer. Existing paintwork in sound condition should be washed down with a warm water detergent solution and abraded. It is recommended that trials be carried out well in advance to ensure that the surface is suitable for application.
Stir thoroughly before use. Flat Oil is best applied by brush. Maintain wet edge. Two coats normally recommended. Thinning is not normally necessary for primed or previously painted surfaces. Thin with white spirit if necessary. Coverage: 16 sq. metres per litre on smooth surface of low porosity. Brushes and equipment should be cleaned with white spirit immediately after use.
1 and 2.5 litre cans. Mixed to order.
Contains no added lead. Actual VOC content <299g>
To be used for the decoration of low-usage joinery and woodwork such as panelling. For interior use only. Flat Oil is not as wipeable as modern gloss or eggshell oil paints.
12-14 m²/ litre/coat on smooth surfaces.
Matt finish with subtle variations in colour and tone. All Rose of Jericho paints are made using powder pigments. Colour and tone variations due to these pigments and differing porosity of surfaces are inevitable. The intention is that our oil paints possess the lack of uniformity and charm of traditional oil paints.
Touch dry in 6 hours in good drying conditions: Touch dry in 6 hours. Allow 18 hours between coats. Ensure adequate ventilation during the drying period. Do not apply in temperatures below 8°C or in damp or humid conditions. Only rarely used for the decorations of walls and ceilings. Flammable. Keep away from sources of ignition. Use in good natural ventilation and wear protective clothing and equipment.
All surfaces should be sound, dry, clean, and free from dirt, oil, grease or other contamination. New woodwork should be primed with an oil-based wood primer. Existing paintwork in sound condition should be washed down with a warm water detergent solution and abraded. It is recommended that trials be carried out well in advance to ensure that the surface is suitable for application.
Stir thoroughly before use. Flat Oil is best applied by brush. Maintain wet edge. Two coats normally recommended. Thinning is not normally necessary for primed or previously painted surfaces. Thin with white spirit if necessary. Coverage: 16 sq. metres per litre on smooth surface of low porosity. Brushes and equipment should be cleaned with white spirit immediately after use.
1 and 2.5 litre cans. Mixed to order.
£0.00